AL-BARAKA CONSTRUCTION CO. LTD. is responsible for the safety conditions of the company staff and other people. To avoid these risks, BCC executes training to ensure that safety conditions are adopted and being complied. Occupational Health & Safety Plan of BCC shall bind company staff to apply every official settings, national legal provisions, and construction laws and international standards. BCC shall provide the highest requirements for occupational health and safety. To be able to do that, comprehensive training must be made to ensure the effectiveness of the application of such settings and standards as company seeks this to become our business slogan – achieve accomplishments upon implementing various projects with zero accidents occurred.


Responsibilities and Safety Conditions

Company allocates Occupational Health & Safety Plan program for all its projects. Safety engineers are responsible for reporting the prepared safety plan requirements accurately. In addition to being responsible for safety of all the company staff working under their command, which is also for their own good, safety and health plan engineers shall relay these rules to every official and supervisor whose responsibilities are to announce and implement the safety plan.

Site Engineer's Responsibilities

  • Make sure that workers properly understand safety procedures.
  • Order safety instructions to various groups of workers and to each group as per its type of works implemented.
  • Record accident reports when happened.

Supervisor's Responsibilities

  • Make sure that workers and staff bind to wearing personal protective equipment.
  • Directly supervise workers and effectively reminding them to comply with settings and instructions of the approved safety and health plan.
  • Inform site engineers of the accident immediately after occurred.

Safety engineers of the company shall effectively participate in planning activity in consultation with company staff prior to approval on business safety plan; especially, involving them in analyzing risks of work including many accident to be occurred (for example, trenches works and earthworks, etc.).

Furthermore, supervisors shall apply safety provisions and train and educate them to staff (sessions for staff prior to work for the purpose of planning, works performance and analysis of work risks) known as work safety analysis. They are also responsible for reporting accidents and analyze their causes. Both safety engineer and supervisor shall be responsible for inspecting heavy weight equipment and tools, small devices and lifts.


Meetings at Work Site

Engineer of occupational health and safety shall hold a number of meetings with construction works director and sites supervisors in order to discuss and follow up work programming weekly. He shall also hold meetings prior to daily works in order to discuss daily work course, required tools to be used in such work or other; to avoid accident risks and lay out and approve work plan prior to commencing work.


Report Writing

Engineer of occupational health and safety  shall provide company and board directors with reports on course of investigation in injuries and accidents occurred, define time when they occurred within work hours and inform the higher administration of that in case of any injuries to any of company staff or in case of any deaths and report this per 24 hours.


Training

Company workers shall be trained and introduced to work site prior to starting work. If any person came late to work site, he would not be allowed to work pending that safety engineer convinced that he is qualified to physically and psychologically commence working. 

Approach of Safety Training Shall Include the following:

  • Provisions of safety instructions application
  • Staff responsibilities toward work and contractor regarding application of safety terms.
  • Protective wears and how they are important for personal protection against accidents.
  • How to get instructions from project administration in case of accident occurred.
  • How to use various work tools and equipments properly and safely.
  • Safety plan regarding using scaffolds and avoid falling down them.
  • How to inform safety supervisor and project supervisor of any of the staff injury; and procedures to be fulfilled by the injured person before leaving work site.

Company shall conduct training for supervisors on safety prior to commencing work and on their responsibilities; and order the following instructions:

  • Supervisor who allows risk to take place shall be penalized and dismissed.
  • Any supervisor shall conduct and assist with investigation regarding any accident which may occur to any of our workers and staff.


Medical Support

Work site shall be equipped with first aid kit for minor accidents; and a trained person to be appointed and authorized by the region health department at which work conducted for how to use the kit for treatment of work injuries. All workers shall be introduced to place of such kits at work site; and work site shall be equipped with litters for emergency conditions, in addition to a vehicle used as an ambulance and a driver for the project to transport critical injuries to the most nearby hospital for treatment.


Safety & Health Reports

Safety engineers shall organize work in order to avoid all risks which may occurred at work site during work implement. Safety official shall conduct routine inspection at work site periodically.


Risks Resulting from Contact to Dangerous Materials

Purpose of such practice is to ensure possibility to make contacts when risks occurred resulting from all chemicals produced or imported. Such information regarding chemicals risks to be informed in order to limelight what is happening both as a device and material used. Such information notification done by a plan on how to deal with such materials in case of comprehensive risks occurred; and such plan ensure informing project users about container and other warns, training them on using such materials; educating them how to store such materials at work site in case of contact to dangerous materials at work sites; and inform persons who use them of such plan. Such procedure shall be included in list of dangerous chemicals required to ensure safety for each worker and from each container of dangerous chemicals at work site, publish warn for user protection, provide users with information and training them on how to deal with dangerous chemicals at their work site during their first task. When a new risk occurred at their work site, users shall be provided with information on any operation implemented, place of current dangerous chemicals and provide a program on risks occurred; and shall be included in list of dangerous chemicals as per standards.


Tools & Devices

Company shall do supervision to ensure proper dealing with all tools and materials used under product recommendations. Company staff shall be trained properly on using tools; noting that all vehicles and Devices at work site shall be equipped with support warning bells. 


Personal Protective Equipment

Proper selection and usage of personal protective equipment is considered an important element in avoiding injuries relating to work. In any event, personal protective equipment shall provide us with a kind of protection against injuries only when used properly. We understand all requirements of personal protective equipment at our work sites; and we shall appoint and supervise work sites permanently. We also bind workers to wear personal protective equipment for all works at various work sites.

Any given person who gets to a work site shall wear a solid cap; and it shall be suitable for definite kind of risks at work site (i.e. dropping or volatile objects, risk of electric shocks or fire risks)

At work site, some injuries may occurred which are most common to eyes and face resulting from volatile objects, volatile welding sparks, metals, chemicals, gases or radioactive materials). Therefore, staff is bind to wear proper protective equipment to protect face using safety glasses permanently. Gloves also provide safety against different types of risks such as (sharp or solid objects, definite chemicals or electrical objects). Therefore, staff who are in contact with chemicals or harmful materials are well trained on wearing proper personal protective equipment as per product recommendations. We shall equip, promote and honor worker who properly wears gloves when be in contact with any material.   


Protection against Falling Down

Protection against falling down requires worker to be connected (100%) all the time to a safety belt which shall be worn at all conditions for protection against falling down.

When work to be implemented on a height of 1.8 m, then protective procedures against falling down to be fulfilled 100% as per safety settings which include, but not limited to, safety barrier as it protects those workers who are working on scaffolds from falling down. Staff is well-connected to safety belt around the whole body and with a ring, cables and rope holder for staff protection; in addition to staff training.


Elevators

Company shall appoint a supervisor who shall approve elevator safety and is responsible for reporting and submit a plan for any elevator at work site.


Elevators Daily Inspection

Generally, daily inspection shall be conducted for brakes, ropes and plexus cables which shall be inspected twice at the morning and prior to usage. All workers shall be provided with instructions on international common hand signals and common hand signals of operations of lifting and climbing.


Electrical Inspection and Basic Information

Electrical devices could be a cause of death or dangerous injury to staff. Therefore, they are protected by ropes from accidental damages, grounding work sites, avoid looseness of electrical connections which may cause damages, binding to burying electrical connections by wire tube insulator through walls, ceils, floors or at entrances, through windows or similar holes.  


Earthworks 

Dig trenches over 1 m depth when needed:

Company shall provide the following at places of earthworks with 15 m depth:

  • Supervisor shall daily inspect holes prior to starting works to make sure that holes are safe to get to.
  • All soils to be removed from digging region
  • Workers shall leave a 1.8 m barrier behind earthworks open at night so that people could know that there are earthworks implemented. 


Welding

General protective procedures are as follows:

  • Inspect work site properly
  • A fire extinguisher to be found during operations implemented.
  • A protective space of 4 inches to be left from welding region.
  • Provide proper personal protective wearing equipment for such works.
  • Inspect work site and make sure that sparks or fusible metals will not be in contact with flammable or combustible materials.
  • Make sure that there is a nearby proper fire extinguisher.
  • Inspect all welding tools, flares and stairs.
  • Obtain and sustain equipment to be kept in safe work condition.
  • Works of welding, barrel cut, tanks, pipes and pans which may contain combustible or unknown materials shall not be commenced without supervisor's permit. Work shall be conducted at good ventilated places. Workers shall wear long clothing, shirts, boots and safety caps which shall protect all workers from falling objects, pressure, sliding and electrical shocks. Workers shall wear boots or strong boots at work site permanently. 

Click for More
Clearly visible gear construction may be fake watches part of uk replica watches the men's preferences - some people like to replica watches be able to see the operation inside the watch, some people feel some explicit and exaggerated. If you belong to the former, choose the swiss replica watches visible gear structure, this watch will look more sense of design, more sophisticated, and even some belong to the earnest and special of a boyhood.